Description
Introducing the Eros SE All-In-One Disposable Vape Pen from iKrusher. EZ to Fill your Own!
Reg. Price $10
The Eros SE is an inhale-activated vaporizer that features iKrusher’s newest iKonic Arc ceramic coil, which allows for balanced, smooth vapor with no burnt taste!
- Long-lasting, rechargeable 400mAh lithium-ion battery and a USB-C charging port.
- Features a glass tank, medical-grade stainless steel center post, and four 1.5mm intake holes.
- Two Sizes: 1.0ml (recommended for distillate or live resin) and 2.0ml (recommended for distillate)
- The iKrusher Eros is not designed to be refilled
It is an “all-in-one” (AIO) disposable vape pen, meaning it is intended for single-use and should be discarded once the oil is depleted. Even though the Eros has a USB-C charging port, this is only to ensure the battery lasts until the oil is finished. Once the tank is sealed any attempt to open it for a refill is likely to damage the device and cause leaks.
Tips for Successful Fill:
- Use a syringe to fill the oil around the inner walls, and then cap and prime the cartridge
- The process should be completed within 1.5 minutes to prevent leaks, especially with thinner oils.
What you'll need:
- iKrusher Eros all-in-one Disposable Vape Pen
- Your choice of oil or concentrate, ideally pre-heated to around 122°F (50°C) for easier flow
- A blunt-tip syringe with a narrow gauge (around 2.0mm)
- Clean, flat workspace
- Paper towels for any spills
- Gloves Recommended
Step 1: The Eros mouthpiece has a cap that will be pressed on, but it must be filled before the final cap is sealed
Step 2: Fill the cartridge with distillate.
- Carefully insert the syringe into the open cartridge, avoiding the central airflow post.
- Dispense the oil slowly down the inner walls of the glass tank.
- Fill the cartridge to the recommended level. Do not overfill, as the mouthpiece will take up some space when you cap
Step 3: Cap the cartridge
Immediately after filling (within 1.5 minutes, especially for thinner oils), press the mouthpiece onto the tank until it's securely sealed
Step 4: Prime and stand upright
- To prevent leaks, immediately flip the cartridge upside down for 30 minutes after capping. This allows the oil to cool away from the mouthpiece.
- Flip the cartridge right-side up and let it stand upright for another 30 minutes. This gives the coil ample time to become fully saturated and prevents "dry hits"
Step 5: Start vaping
After the cartridge is fully primed, attach it to your 510 battery and begin with a few short, gentle puffs at a low-voltage setting to warm up the coil gradually.
